How to Get Rid Of Static Noise from Car Speakers

How To Get Rid Of Static Noise from Car Speakers

Today we discuss How To Get Rid Of Static Noise from Car Speakers. Is your car speaker producing irritating noise or static sound? It is annoying to listen to the loud popping or crackling noises instead of your sweet track.

It can make your journey dull and lifeless. In fact, it is a sign that your speaker isn’t going well and most probably it is damaging. Perhaps, the problem is in your cable, in the speaker, in the power, or any other equipment.

No products found.

As sound is sent to the speaker through wire or wireless, distortion in any device can make it irritating. Here are some tips you can follow to get rid of How To Get Rid Of Static Noise from Car Speakers

Bestseller sound Deadening materials for car:

static noise from car speakers:

Static noise from car speakers is usually caused by a short in the wiring. When this happens, the amplifier tries to send power to the speaker, but instead of getting power back, it just creates a loud buzzing noise.

If you’re experiencing static noise from your car speakers, the best thing to do is take it to a mechanic and have them check out the wiring. It could be an easy fix, or it might be something more serious that requires a bit more work. Either way, it’s best to get it looked at sooner rather than later.

How to Change Your Car Speaker

Causes of Creating Static Noise From Car Speakers:

So, before we’re heading into the deep to restate the sound, let’s find the actual problem for what you are experiencing with this static noise.

1. Damaged Speakers:

Apparently, 95% of problems of static sound come from damaged speakers. The damaged cone produces a lot of vibration which creates static and extra noise. Sometimes your speaker may be torn or loose and can’t vibrate precisely.

Along with that, something can be contacted by the speaker when sound is produced. Ultimately, the single particles of the speaker play a vital role in sound flowing.

Hey there! Some links on this page are affiliate links which means that, if you choose to make a purchase, I may earn a small commission at no extra cost to you. I greatly appreciate your support!

If anything doesn’t work well, the sound quality won’t be up to the mark. So, have a deep look at the speaker at first when you experience a bothersome sound.

2. Excessive Power:

Though power is essential to make sound loud and clear, excess power creates distortion-type in the music. Only speakers or amplifiers can’t control the power of the electricity.

So, when you hear distortion in the sound, you should look at the electricity as well as its power. On the other hand, distortion while recording may not be avoidable.

Hence, you can turn down the volume on the speaker. It helps to listen to the music distortion-free although the sound is too low.

3. Old Amplifier:

Sometimes an old amplifier produces a crackling and irritating sound. So many uses of transistors and capacitors may be over time. Also, the connections by which the sockets hold the transistors and capacitors may be corroded and loose.

And most important, loud bass music produces excessive vibrations which cause static sound.

4. Loose Connection:

Wires are the component that carries the sound as well as the power from an external source to the speakers. However, a wireless connection is available, but it is slightly more priced.

On the other hand, a long wired connection requires more power and becomes loose. Though you can repair the long wire, you can’t use it after several times repairing.

Even, sudden connection loss in the mid of a long journey can come to the end of a “would be” memorable journey. And of course, you may not have enough instruments to repair the wire perfectly.

5. Unexpected Interference:

Electromagnetic radiation is obvious, and you can’t avoid it at all. It comes from almost all electronic devices. In fact, no matter whether your speaker is wired or wireless, it will produce radiation.

Likewise, television, radio, microwave oven, Wi-Fi Routers, mobile phones and refrigerator, the car speaker also emit EMR. So, when it comes to the connection of the other electronic devices, a static sound may be produced.

By the way, some specially designed car speakers have come that can produce a minimal static sound that you’ll hardly listen to.

How to Get Rid Of Static Noise from Car Speakers?

As the first step of solving How To Get Rid Of Static Noise, we have gone through the issues that can create static sound. Now, you have a clear idea of which reason is behind creating such an irritating noise.

Now, let’s take steps in solving the problem and enjoy the awesome sound. Each problem has a distinctive way to solve for the best experience. Some are critical, and some are easy to go.

For example, if the wire becomes loose from the speaker, you can glue it faster for preventing vibration. Also, you may remove something that is touched by the speaker to produce static sound.

So, follow the next steps and go for the easiest way.

1. Turn off Your Car Sound System:

If you think that problem is in the wire, you have to test the wires. First, turn off the car sound system and disconnect the amplifier from the sound system. Then fit it well to the speaker or re-position the wires. Maybe your problem is firmly solved. However, if the problem still exists, change the position of the speaker.

2. Use a Magnetic Shielding Foil:

No products found.

Your speaker may produce static sound if radiated static noise exists there. To test the source, pull the receiver from the dashboard. You have to do it while the soundtrack is going in full swing.

If the static noise fades away after pulling the dashboard, then the problem is in your car’s sound system. Here, put a magnetic shielding foil beside the sound system. This foil receives the wraps and prevents static noise.

3. Check Power:

If the static noise still exists after testing the above steps, the problem may be in your car’s power system. So, test the car battery with fluid.

If the car battery is old and cankered, it is best to contact a mechanic. Sometimes less power is responsible for the static noise which you can minimize by adding a new car battery.

4. Install a Noise Filter:

And finally, we are at the end of the recommended ways. If you find no problem with your sound system, wire connection, or battery power, consider installing a noise filter.  This filter prevents poor grounding which produces static sound.

How to Get Rid Of Static Noise from Car Speakers

Final Remarks:

The static sound makes your moment an irritating one. Even, it can turn your sweet moment into a dull one.

So, always try to use the best speaker which produces a buoyant and brisk sound. Beyond that, if you experience a little bit of noise, never ignore it. Try to find out the reason behind it and fix the problem. Happy listening to the music!

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *